Last Updated on November 21, 2020 by Christ Show
Reset Guide: 2011-2017 Chrysler 200 Oil Change Required Light – The Chrysler 200 is a car produced by the US car manufacturer Chrysler from 2010 and marketed from 2011 until 2017. There was a European variant of the car: Lancia Flavia, sold only in the cabriolet version. It is a 4.87-meter-long sedan and, like the model it replaced, is marketed with two body variants: sedan and a convertible. The 200 is based on the same platform as its ancestor, the “JS,” the name Chrysler identifies its version of the Mitsubishi GS platform. Contents
Reset Guide: 2011-2017 Chrysler 200 Oil Change Required LightWhen you exceed the next scheduled oil change interval, the Oil Change Required light will display in the screen. This indicator system must be reset after performed the maintenance on your vehicle. Depending on your vehicle model, here are a few ways to reset the oil light on 2011 2012 2013 2014 2015 2016 2017 Chrysler 200: With Gas PedalTime needed: 7 minutes. The fastest way to reset the oil light on all Chrysler 200 car models is by pressing the gas pedal. Here’s how to get started:
With Cluster DisplayFor the 2015 model year vehicles or above, you can also reset the oil through the instrument cluster by using the steering control button. Here’s how to do it:
These instructions are based on the Chrysler 200 owner’s manual. This procedure should apply to the first and second generations of the Chrysler 200 (2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article Reset Guide: 2011-2017 Chrysler 200 Oil Change Required Light can solve your problem. Good Luck!
Sep 13 2016 Chrysler 200 Reset the Chrysler 200 oil change indicator after an oil change by following these instructions:1. Turn the ignition to run (one position before starting engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition off and then start the engine to verify the indicator has been reset.How do you reset the oil life on a 2011 Chrysler 200?2011-2015. Turn the key to ON/RUN position with engine off.. Fully depress and release the accelerator pedal 3 times within 10 seconds.. Turn the key to the OFF position and then back on to confirm reset was accepted.. |