How to reset oil change light on 2007 chevy trailblazer

To reset the Chevy TrailBlazer oil life light You will start by turning the ignition to the "ON" position but don't crank the engine. Now You will press and release the gas pedal to the floor slowly three time within five seconds. You will know if it is resetting because the "change oil soon" light will blink. Now turn the ignition off and then start the car up again to see if the light has disappeared. This is important to do because it will allow You to keep track of the oil change service intervals which is one of the most important fluids to change in the vehicle. You can either do the oil change Yourself or get it done at a service shop which will cost about $30 - $60 depending on if its conventional or synthetic oil.

Table of Contents Show

TRAILBLAZER OIL RESET INSTRUCTION
2001-2009 TRAILBLAZER OIL LIFE RESET
2012-2021 TRAILBLAZER CHANGE ENGINE OIL SOON RESET
THIS TUTORIAL MAY WORK TO THESE CAR MODEL.
Engine Oil Life System
When to Change Engine Oil
CHANGE ENGINE OIL SOON
How do you reset the change oil light on a trailblazer?
What does the wrench and oil light mean on a 2007 Chevy Trailblazer?

accountCircle

Barbara M. April 9, 2020

To reset the chevy trailblazer oil light, you will forward two clicks to the accessory power position to change the ignition key. To navigate through the dic, press the "fuel information" button before "oil life" is shown in the interactive menus. Press and hold the left arrow button until the "100 per cent" symbol appears on the dic's interactive menu. Switch the ignition key to place on the accessory control. Depress the accelerator pedal thrice to the floor within a five-second period. Switch the ignition to location of off. Start the trailblazer to ensure it follows the reset process.

The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com does not research or authenticate any of the Answers provided.

Jul 23

Instructions Add comments

1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. If the Change Oil Soon light flashes the system is resetting.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Comments are closed.

TRAILBLAZER OIL RESET INSTRUCTION

2001-2009 TRAILBLAZER OIL LIFE RESET

STEP 1

Turn the ignition key to RUN with the engine off.

STEP 2

Fully press and release the accelerator pedal slowly three times within five seconds. The change engine oil light will flash while the system is resetting.

STEP 3

When the light stops flashing, turn the key to LOCK. Oil Reset is complete.
If the light/message comes back on when you start the vehicle, the engine oil life system has not reset. Repeat the procedure.

2012-2021 TRAILBLAZER CHANGE ENGINE OIL SOON RESET

On this tutorial we need to use the DIC BUTTON, located at the RIGHT SIDE of the STEERING WHEEL.

STEP 1

Turn the Ignition On, Don’t start the ENGINE.

STEP 2

Use the DIC Button. Press the LEFT ARROW button then use UP ARROW to select INFO, Then Press the OK BUTTON.

STEP 3

Use the UP or Down Arrow, to navigate and to display the REMAINING OIL LIFE.

STEP 4

While the REMAINING OIL LIFE is displayed. PRESS and HOLD the OK BUTTON until the REMAINING OIL LIFE will RESET to 100%. (You will hear a single beep)
OR Press RIGHT ARROW– RESET– confirmation message appear select YES. After Pressing YES the OIL LIFE will reset to 100%.
OR While the OIL LIFE is displayed. Fully press the accelerator pedal slowly three times within five seconds. The OIL LIFE will RESET TO 100%.

STEP 5

Turn Engine OFF. Oil Reset is done.

THIS TUTORIAL MAY WORK TO THESE CAR MODEL.

Holden Colorado 7 (New Zealand)
Holden Trailblazer (Australia)

Engine Oil Life System

When to Change Engine Oil

This vehicle has a computer system that indicates when to change the engine oil and filter. This is based on a combination of factors which include engine revolutions, engine temperature, and miles driven. Based on driving conditions, the mileage at which an oil change is indicated can vary considerably. For the oil life system to work properly, the system must be reset every time the oil is changed.

CHANGE ENGINE OIL SOON

This message displays when the engine oil needs to be changed. When you change the engine oil, be sure to reset the Oil Life System.

The Oil Life display must be reset after each oil change. It will notreset itself. Do not reset the Oil Life display accidentally at any time other than when the oil has just been changed. It cannot be reset accurately until the next oil change. To reset the engine oil life system,follow the instruction above.

How do you reset the change oil light on a trailblazer?

2008 CHEVROLET Trailblazer Maintenance Light Reset Instructions.

Turn the ignition to run (one position before starting engine)..

Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds..

If the Change Oil Soon light flashes the system is resetting..

What does the wrench and oil light mean on a 2007 Chevy Trailblazer?

Nick Kunze · Answered on Apr 21, 2022. Reviewed by Shannon Martin, Licensed Insurance Agent. The wrench and oil light means it's time to change your oil. This light will indicate a low oil level or the need to change your oil filter. Getting your oil changed should lead to the light turning off.