How do you cover up peeling walls?

Its best to scrape off peeling paint with something like a 5-in-1 tool, then go over the area with sandpaper. If you need to, use drywall compound or spackling to repair any holes, and sand the area again. Then, finish with primer and top coat. Thanks!

How do you paint over peeling without scraping it?

A popular choice is Zinssers Peel Stop, which is a water-based primer that penetrates chalky surfaces and helps to glue-down the edges of cracking and peeling coatings to the substrate so they can be successfully painted over. It can be used on both interior and exterior applications in lieu of paint stripping.

How to paint a wall that is peeling

Lee has over two decades of hands-on experience remodeling, fixing, and improving homes, and has been providing home improvement advice for over 13 years.

Table of Contents Show

Basics of Fixing Chipped, Peeling Paint
Safety Considerations
What You'll Need
Equipment / Tools
Instructions
Scrape Away the Loose Edges
Remove the Loose Paint by Brushing
Apply the Wood Filler
Allow the Wood Filler to Dry
Sand Down the Wood Filler
Check for Smoothness
Apply the Primer
How do you paint over peeling walls?
How do you cover up peeling walls?
How do you paint over peeling without scraping it?

Learn more about The Spruce's Editorial Process

Updated on 06/02/22

Reviewed by

Deane Biermeier

Reviewed by Deane Biermeier

Deane Biermeier is an expert contractor with nearly 30 years of experience in all types of home repair, maintenance, and remodeling. He is a certified lead carpenter and also holds a certification from the EPA. Deane is a member of The Spruce's Home Improvement Review Board.

Learn more about The Spruce's Review Board

Fact checked by

Alexandra Kay

Fact checked by Alexandra Kay

Alexandra Kay is a writer, fact-checker, researcher, and editor who checks The Spruce articles for accuracy and adds source citations. Alex frequently writes for b2b and b2c publications. When she isn't writing or fact-checking for print or online articles, Alex is an associate professor of English at a community college.

Learn more about The Spruce's Editorial Process

Joseph Sohm / Getty Images

Project Overview

Working Time: 2 - 4 hrs
Total Time: 2 - 4 hrs

Skill Level: Beginner
Estimated Cost: $15 to $50

Before painting your house's interior or exterior, it's important to deal with existing paint problems. Although you can simply cover over old, peeling, or chipped paint with a fresh coat, this approach tends to leave telltale rough edges.

In a certain light, this paint cover-up is highly visible. For key areas—or if you are just more of a perfectionist—you will want the underlying layer to present a perfectly smooth, flat surface as the base for a fresh coat of paint.

Basics of Fixing Chipped, Peeling Paint

If you're extremely motivated and have a great deal of free time on your hands, you can strip off every square inch of paint right down to bare wood, But it's easier and more logical to make spot fixes instead of stripping away all of the paint.

When peeling or chipping paint is found in a small area, you may be able to simply brush off the peeling paint and then prime the wall and paint over it. As long as the remaining edges of the peeling area are stable, this solution will work. But it's not always the most attractive solution, especially if you're dealing with peeling or chipped paint that is several layers deep.

A better method is to fill the depressions with wood filler before priming and painting. In addition to being more attractive, this method also helps protect those edges of existing paint so that they are less likely to begin peeling again.

Tip

This type of fix is best for small and infrequent patches of peeling or chipped paint. If the house is badly damaged, all of the paint should be removed.

Safety Considerations

Older homes, especially those built before 1978, may have been painted with lead-based paint. Lead-based paint has been proven through research to cause neurological damage. It is particularly harmful to pregnant women and to children. Test the paint for lead before you begin stripping or sanding it. If it does contain lead, have the paint removed by a qualified remediation company.

What You'll Need

Equipment / Tools

Putty knife
Paint scraper or 5-in-1 tool
Wire brush
Sander with fine-grit sandpaper
Paintbrush

Materials

Wood filler
Primer

Instructions

Scrape Away the Loose Edges
With a paint scraper or 5-in-1 tool, scrape away loose edges of the painted area. Stop when it becomes too difficult to pry away the paint. Also, take care not to gouge or damage the wood with the sharp edges of the scraper.
pablohart / Getty Images
Remove the Loose Paint by Brushing
With a wire brush, vigorously sweep away remaining debris from the area. Work the edges of the damaged area once again. If more paint begins to peel, go back and pry it away with the paint scraper.
Lee Wallender
Apply the Wood Filler
Apply wood filler to a putty knife and spread a thin layer of filler across the damaged area. Make sure that the wood filler extends slightly beyond the perimeter of the damaged area. This excess wood filler will later be sanded away. Be sure to flex the putty knife to produce a flat surface.
Lee Wallender
Tip
Do not apply the wood filler thickly as this will only be more material for you to sand away. Apply only enough to cover the damaged section, plus just a bit higher.
Allow the Wood Filler to Dry
Allow the wood filler to dry as directed by the manufacturer's instructions. This normally takes 45 minutes to one hour, but you may wish to give it at least two hours. If you try to sand before it has thoroughly dried, the filler will slough off when you sand.
Tip
Water-based wood filler will dry faster than oil-based wood filler.

Lee Wallender
Sand Down the Wood Filler
Attach a fine-grit paper on the oscillating sander, and grind down the patched area until it is flush and smooth with the surrounding paint. Avoid sanding down all the way to bare wood.
Lee Wallender
Check for Smoothness
Run a bare hand over the patched area to feel for smoothness. The patched area should blend in with the surrounding paint. If you are unable to smooth the area entirely—such as when the board is badly damaged—a good option is to replace the board entirely.
If the wood filler is not flush with the surrounding wood, repeat the earlier steps.
Lee Wallender
Apply the Primer
When the filled area is smooth to your satisfaction, apply a primer to the entire surface to prepare it for painting.
Tip
Priming the entire surface will help the filled area blend in perfectly when you apply paint. If you do not prime, the patched area may absorb paint at a different rate than the surrounding area.
Lee Wallender