EverStart Battery Charger – A Helpful Kit in Case of Emergency
One of the most common problems which are faced by car owners is definitely a dead car battery. When you find your vehicle in no-start condition, there is the question coming up to your mind: “What to do next?” First, you have to define the term your battery will last. An average term of a battery life is 3 – 5 years. There are cases when batteries work for 6 years, but some of them do not last even for a year. It depends on a personal style of driving and condition a battery is kept in.
I am going to present you a list of driving styles and conditions which affect batteries the most. Some of them can’t be replaced but, still, there are several things one can do to increase a lifetime of his battery.
- Life span of batteries is significantly reduced by constant short trips. If an average run time of a vehicle is less than 20 minutes, a battery is rarely fully recharged.
- Short run times coupled with many starting cycles leave the battery below the ideal charged specification.
- Extreme outside temperatures affect chemical reactions inside a battery. That is why many Everstart batteries are encased in a special insulated jacket. Proper insulation allows a battery to go through normal temperature changes slowly expending overall battery life.
- Never discard the insulated cover of your battery because it can also shorten its life span.
- If you battery appeared to be dead, there is a solution instead of removing it. You should get a battery charger. A proper device like EverStart battery charger can help you to avoid reinstalling.
Increase the Life Span of Your Battery with EverStart Battery Charger
Of course, dead car battery will leave you immobile for some time, but it is not the reason to be frustrated. Here you have two ways to go. You can get a “jump” from another car, but it will solve the problem partially. If you want to prevent it from happening again, get a battery charger. This device can be extremely helpful and does not require special skills to be used. All you need is just needle-nose pliers, 110V electrical outlet, and EverStart battery charger.
Steps to follow:
- Make sure your battery is not connected to the cables and unplug the charger.
- Connect the charger to the battery. The negative cable connects to the negative terminal, and the positive one – to the positive.
- Slide the switch to over 12V.
- Plug the battery charger into an outlet. When the charge is complete, the charger will automatically shut down.
- Unplug the charger.
- Remove the cables.